Uhf Roof

Does a VHF(only) roof antenna receive any UHF signals?

My building has a VHF(only) antenna, reception was excellent. I was wondering if there is some way to receive UHF signals in my apartment?

>Does a VHF(only) roof antenna receive any UHF signals?

Yes, but the signal would have to be very strong. DTV tuners & converter boxes will automatically scan for UHF stations. If it doesn’t find any, then the existing antenna isn’t good enough.

>is some way to receive UHF signals in my apartment?

Assuming that there are some UHF stations that are close enough to receive:

1. Talk the landlord into adding a UHF roof antenna or replacing the current one with a UHF/VHF antenna.

2. Add an indoor UHF antenna. The chances of success are a lot smaller with an indoor antenna. Indoor antenna tend to be a hit and miss sort of thing.

I either case there is something called a band splitter/combiner to merge the two antenna leads together. See first link.

To find out if reception is even possible, you need to find out info about your local TV transmitters. The tvfool link below includes an option for posting your reception information without giving your address.

3/4″ NMO BRASS SURFACE ROOF ANTENNA MOUNT MINI-UHF $12.99

An Open Air satellite receiver (abbreviated FTA receivers) refers to satellite receivers that are designed to receive unencrypted FTA satellite transmissions. Using these satellite receivers, you can legally receive TV signals without subscription. The signal is usually encoded in an MPEG-2 and may be restricted geographically. In some places around the world, people can receive encrypted channels free satellite air through the UHF and VHF band. The satellite transmission channels through Free air are collected for the use of a common MPEG-2 video compatible satellite receiver. Many people use FTA to receive thousands of satellite TV channels for free.

The equipment necessary for you to enjoy the freebies are FTA receiver (and here's a choice between Pansat, Coolsat, Conaxsat, and many others Great brand names) and a title = "Satellite Dish"> satellite dishes in the details required by the satellite you want in point. However, many satellites only require a digital television standard compliant dish that can be easily found in any television satellite / shop. Both C-band and K-Band dishes work very well. If you wish to receive channels from more than one satellite, you also have to have an engine of the antenna.

Once you have control of the two pieces of hardware, you can then start with the pointing of the antenna. To accomplish this, one needs to have a coaxial cable from where the dish and make your way to the FTA receiver to be connected to television. Normally this is the hardest part. While pointing the dish is not very difficult, many people prefer to hire a person agile enough experience to fix the roof of the house.

Once done this, then you can go about the business of pointing the dish. You will go to the options of the FTA receiver and select the title = "Satellite"> actual satellite you at the point. It is also likely that you will need to load some firmware updates. FTA keys will to be entered manually, and therefore it is important that you become familiar with this process. Introduction of the keys usually involves entering NAFTA creation screen to whatever receiver you own and look for code installation. However, a key point to remember is that each satellite receiver is different and adjustments may vary.

About the Author:

Author: Greg Dempsey – Business Telecommunications
Title: Satellite Receiver
http://www.businesstelecommunication.net/satellite/satellite-receiver

Reprinting this article is allowed with this footer attached.

Article Source: ArticlesBase.com – Satellite Receiver