Transceiver Cable

How can I connect my cable box, computer, and HDdvd player wirelessly to my projector?

My projector has the typical video inputs; VGA, RCA Video, S-Video, and something called a RS232 control port. I figure I could use the RCA video with the Cable TV box. I could pair the VGA with my desktop or laptop, and the S-video with the HDdvd player.
I was wondering if I could connect all these components to a transceiver and send them wirelessly, with the same quality, to a reciever and then to my projector?

Here is a much cheaper solution. The unit mentioned is over $600 and is designed for HDMI use.

There are several questions I have, such as, what is the model of your projector? You do realize that you will not be getting true HD from your HD DVD player through an S-video cable, right?

The only connection on your projector that is HD capable is your VGA input. BUT, that does not mean your projector has a native resolution that is 720p or higher. More than likely, your projector is 1024X768, which *SOME REFER TO* as half HD, because for true HD you need at least a 1280X720 native resolution. What a projector does that has native resolution of 1024X768 is down convert the HD signal to a lower resolution.

I say all of that to say this, you need to evaluate how you are hooking up everything. I would suggest getting a receiver with component outputs, and then get a cable which is component to VGA. This will allow your projector to receive all signals at the highest level the source can input (cable, HD DVD, etc.). You can get this type of cable on ebay. 25ft, 50ft, etc. Follow the link below for a 50ft cable for under $30 bucks. I have one and it works great!

Let me know your projector’s model number and I can tell you what the native resolution is. I cannot imagine it’s an HD projector with no HDMI or component inputs, UNLESS it is an older projector. But almost every HD projector made in the past two years has HDMI or Component inputs.

Yaesu FT-2800M Heavy Duty Transceiver 65W High Output w/ Free Programming Cable! $65.00

heathkit hp23 ham radio power supply 11pin cable-fits sb 100 series transceivers $24.00

Camera CCTV BNC CAT5 Video Balun Transceiver Cable $8.00

2 x SO239 to N extension cable for Mobile radio transceiver Yaesu Icom extend $42.80

6 UHF handheld Walkie Talkie 16CH transceiver radio &software/cable & headset $320.00

AMERITRON ARB-704 5-PIN DIN CABLE TO TRANSCEIVERS DIN/MINI DIN CONNECTOR W POWER $32.50

Puxing PX-D03 Cell Phone Dual Band Transceiver + MP3 + USB program cable + CD $195.80

Camera CCTV BNC CAT5 Video Balun Transceiver Cable $9.18

Replacement CT-142 USB Programming Cable Yaesu FT-350 transceiver Mobile Radio $29.99

USB Prog cable Yaesu FT817ND FT857D FT897D transceiver $13.89

BaoFeng UV-3R du-band transceiver + USB program cable $44.20

WOUXUN KG-UVD1 Dual Band Transceiver radio + USB Cable $108.00

2 x FD-450A UHF400-470 transceiver earpiece + PGM Cable $79.60

WOUXUN KG-UVD1 Dual Band Transceivers + USB Cable $99.00

WOUXUN KG-UVD1P VHF UHF Transceiver FREE USB Prog cable $105.00

BRAND NEW 8 & 11 PIN CABLE FOR HEATHKIT HW TRANSCEIVERS $29.99

BRAND NEW 11 PIN CABLE FOR HEATHKIT SB & HW TRANSCEIVER $29.99

BRAND NEW 8 & 11 PIN CABLE FOR HEATHKIT HW TRANSCEIVERS $29.99

BRAND NEW 11 PIN CABLE FOR HEATHKIT SB & HW TRANSCEIVER $29.99

USB Program Cable Yaesu FT7900R FT-7900R transceiver $18.99

USB Programming Cable for Yaesu ham radio transceiver $13.50

WOUXUN KG-UVD1 Dual Band Transceiver + FREE USB cable $113.00

Toronto, Canada – has deployed a high performance and is specially designed for use with single mode (SM) fiber and is fully compatible with with SONET / SDH OC-48 recommendations for specifications.It operates at a wavelength of 1310nm and is suitable for standard telecommunications and data applications such as 1.25Gigabit Ethernet over Cat 5 cable, switch / router to switch / router and high-speed link I / S for file servers.

The HTSFP-24-111X copper transceiver consists two sections: the section of the transmitter and receiver section section.The transmitter incorporates FP and driver IC with temperature compensation and automatic control circuit.The power receiver incorporates a cross section of InGaAs / InP PIN photodiode and trans-impedance with AGC dynamic rage.

The transceiver plug Hot has a small form factor package, detailed product information in EEPROM, compact assembly RJ-45 connector and can be accessed through the physical layer of IC 2-wire serial bus. The transceiver consumes little power and provides excellent immunity and reliability of their data LVPECL interface simplifies interface to external circuits.
Visit for more information or to purchase this product online.
For any questions please contact sales:
1-877 585-9555 – Toll Free (U.S. & Canada)
1-416 292-0038 – All Other Areas
sales@gaofiberoptics.com

About GAO Fiber Optics
GAO Fiber Optics, a member company of GAO Group, is a leading provider of evidence Fiber optics and measurement instruments, transceivers and fiber optic devices other.

Toronto, Canada – has deployed a high performance and is specially designed for use with single mode (SM) fiber and is fully compatible with SONET / SDH OC-48 recommendations for operating specifications.It at a wavelength of 1310nm and is suitable for standard telecommunications and data applications such as Ethernet 1.25Gigabit via Cat 5 cable, switch / router to switch / Router and high-speed link I / S for file servers.

The HTSFP-24-111X copper transceiver consists of two sections: section of the transmitter and the section.The transmitter receiver section incorporates FP and driver IC with temperature compensation and automatic power control incorporates a receiver circuit.The section efficient InGaAs / InP PIN photodiode and trans-impedance with AGC dynamic rage.

The transceiver has hot-plug small form factor package, information Detailed product in its EEPROM, RJ-45 connector assembly compact and can access the physical layer IC via 2-wire serial bus. The transceiver consumes little energy and provides excellent immunity and reliability of data LVPECL Its interface simplifies interface to external circuits.
Visit for more information or to purchase this product online.
For any questions please contact sales:
1-877 585-9555 – Toll Free (U.S. & Canada)
1-416 292-0038 – All Other Areas
sales@gaofiberoptics.com

About GAO Fiber Optics
GAO Fiber Optics, a member company of GAO Group, is a leading provider of fiber optic test and measurement instruments, transceivers and fiber optic devices other.

About the Author:

About GAOFiberOptics Inc.
GAOFiberOptics Inc., a member of GAO Group, is a leading provider of embedded development tools, telecommunication testers, electronic measurement instruments, video surveillance, alarm and other electronic products that serve the needs of electronic professionals internationally. For further information, please visit http://www.GAOFiberOptics.com.

Article Source: ArticlesBase.com – An Innovative 10/100/1000 BASE-T SFP Copper Transceiver