Switch Rew

What should you do when your iPod freezes or you frequently see the Sad Face icon appearing on your screen? Do you run to the nearest computer guru or iPod geek and shell out cash that you don’t have? Why not learn how to fix some of these yourself!

There are several diagnostic tests you can do to see if your iPod has a hardware problem. It is nice to turn to the built-in Diagnostic Mode on your iPod to check for hardware problems. First, you need to restart your iPod and then put it in Diagnostic Mode. Make sure the hold switch has been turned off. You can do this by pushing the switch away from the headphone jack. Jiggle it on and off to be sure. To reset your iPod, you will need to press and hold a few buttons at the same time for about 10 seconds. Hold the “Menu” and “Play/Pause” buttons down if your iPod is 1G to 3G. If you have the iPod 4G, you will need to press and hold “Menu” and “Select”. If your iPod has been reset, you should see the Apple logo and feel the spinning of the hard drive. Now, press and hold these buttons: “REW”, “FFW” and “Select” for iPod 1G to 3G and “Back” and “Select” for the iPod 4G. If your model is a 3G or above, you should hear a bird chirp sound and the Apple logo should pop up backwards. You have now reached the mecca of Diagnostic Mode. Keep in mind that your scroll wheel will not work when you are in this mode. Using “REW” and “FFW”, you can look through the lists of tests to see which one you might need.

If your iPod is older, there are some tests you can run on 1G to 4G’s. The 5 in 1 will run five separate tests at one time that include the LCM, SDRAM, RTC, FLASH/CHECKSUM. AMD FOREWORE/FW ID. For 3G iPods, you will hear a jingle when the test has completed. RESET will tell you if your iPod can reset. The AUDIO test will check the iPod audio subsystem. If you have a remote, the REMOTE will test it. Make sure your iPod is plugged in or you will get “RMT FAIL” on your screen. FIREARE will check the FireWire port. You want to see “FW PASS”. SLEEP will give your iPod a rest but you will need to reset your system to revive it. To test your iPod’s power, you will need to run the A 2 D test. You will get different outcomes based on where your iPod is getting its power from a battery or wall outlet. If your scroll wheel is giving you fits, run the I.OTPO CNT test. To make sure the screen is functioning properly, run the LCM test. You will need to keep holding down the “Select” button to have it run through several patterns. The RTC test will test the real time clock in your iPod. To test the iPod RAM memory, run the SDRAM test. If you need to find out what firmware version you have on your iPod, simply run the FLASH test. The OTPO or Wheel A2D will test the analog to digital input of your iPod’s scroll wheel. After this test, you will need to reset your iPod. Want to know if you have a healthy hard drive? Do the HDD Scan. The RUN IN test will test the chip sets non-stop. After you have completed all necessary tests, you will need to reset your iPod to get it out of Diagnostic Mode.

The newer iPod test names are easier to understand and won’t leave you looking for your nerd dictionary. The MEMORY test will test the SDRAM, IRAM, and FLASH memory. The SDRAM is the RAM memory test, which may take a few moments. You will want to see “SDRAM OK”. The FLASH test will let you know where you iPod stands on flash memory. The Comms test will let you know how the ports are faring. You will know if your remote is not connected to your iPod if you get a NG, or no good result, for the HP, headphone-port. The Wheel test will test the key and wheel. The LCD test will test the colors, patterns, and gradients of your LCD. To test your hold switch, you will do the Headphone Detect test. When you own an iPod, you want to make sure that you have protected your investment. An iPod is not cheap, and neither are your music downloads. Keep your iPod in top working condition by learning a few things you can do at home instead of paying someone else to fix it.

About the Author:

FREE
information on Gear and Gadgets — Every topic is listed! It’s FREE! Click here:

www.extremequalityrankings.info

Article Source: ArticlesBase.com – Home Remedies for Your Sick iPod

Coaxial RF Relay Switch REV-14 REW-14 for QRO power amplifier antenna HF VHF UHF $40.00

Coaxial Relay Switch REW-14(REV-14,PEB-14)+3conn. New! $79.50

REV-14 (REW-14, PEB-14) COAXIAL RELAY/SWITCH WITH 3 ORIGINAL CONECTORS. $65.00

COAXIAL RELAY/SWITCH REV-15 (REW-15, PEB-15) WITH 3 CONNECTORS. NEW. $21.00

COAXIAL RELAY/SWITCH REV-16 (REW-16, PEB-16). LOT OF 2. $49.00

Coaxial RF Relay Switch REV-16 REW-16 for power amplifier antenna HF VHF UHF SHF $45.00

Coaxial RF Relay Switch REV-15 REW-15 for QRO power amplifier antenna HF VHF UHF $40.00

Coaxial Relay Switch REW-14 (REV-14,PEB-14) Lot of 2 New $139.50

The Dension ice> Link Plus brings complete integration of the Apple iPod with your factory fitted BMW radio. Simply connect the ice> Link Plus to the seizure of CD changer on your radio and start enjoying soft, clean digital music. Imagine having access to over 10,000 MP3s at the touch of a button!

The operation is simple: ice> Link Plus translates messages CD changer controls of the iPod and iPod automatically switches on and off and select / deselect the source CD changer. The iPod is controlled from the CD changer head unit keys and steering wheel controls (where available) and the iPod charges while connected.

Forget the need for cassette adapters poor, illegal FM Transmitters and cables for cigarette lighter at the end. The Dension ice> Link Plus is available for a wide range of OEM Factory Fitted and Aftermarket radios.

Select from Dension broad range of applications such as Active Cradle iPod or Dock Cable for seamless integration. All applications support both Dension user interface mode and original iPod user interface mode and now ice> Link In addition, now has video output large systems integration with rear seat entertainment.

Simple interface …
The ice> Link Menu is the main feature of the ice> Link user interface that lets you easily navigate through the different game modes such as scan, repeat and random play. The menu also allows you to enter the playlist browser, which you can access all playlists your iPod to improve your listening experience. The ice> Link Plus gives your iPod two modes of operation.

1. iPod Direct Access Mode – The iPod playback / Pause to enter / exit CD changer mode on your radio. In addition, the iPod responds to FF / RW from your head unit keys and steering wheel controls (where available)

2. IPod Playback Mode – Your iPod maps the first five playlists stored on the iPod to CDs 1-5 on your head unit keys. Although the iPod keypad is disabled In this mode, the iPod display (and CD Text / dashboard displays in some applications) will show ID3 data of the currently playing song. Advanced content including Random, Repeat, Scan and AlbumPlayer are also available, even on radios that do not have these features. Pressing CD6 access to the ice> Link Plus menu that lets you navigate all the playlists on the iPod using your head unit FF / RW keys. The menu also offers configuration options Advanced Features of the ice> Link Plus.

(Note: the original 1G/2G iPods that do not have the bottom dock connector assembly with no ice Link support and playlist mode or the menu)
Features
• Converts iPod to a virtual CD changer
• Song information appears on the iPod screen (3G and above)
• Play Time, Artist and Title information presented on Radio Display (if radio supports)
• Adjustable output + / -4 V

Directly control iPod
• Start / stop at selection / deselection of CD Changer source
• Next / Back, FF / REW, Random / Repeat / Scan (if radio supports)
• Direct access to the first 5 playlists by selecting disk of

Menu for advanced features and setting, like:
• Browser List
• AlbumPlayer
• Languages
Of • iPod battery charging mode

Control your iPod …
Use your radio or iPod to navigate through playlists, albums and songs and access the simple interface to use the iPod. The ice> Link interprets the radio controls from your vehicle to the iPod to emulate a CD changer, fully loaded, but with features more advanced.

Text Display …
Read the song title and right to information about the artists on your radio. This is also shown on the iPod if your radio does not support text display, giving you all the information you need while on the road.

Future-proof …
ice> Link also has upgradeable firmware. As future features are released by Dension, you can download the necessary files to your iPod seamlessly updating your ice> Link Plus, ensuring you always have the latest version. Also if you change your vehicle, you can upgrade the software compatible with your new vehicle (a harness replacement vehicle may be necessary in some applications).

Mounting the Active Cradle:
The Active Cradle mounts using the supplied screws without but it is recommended that an (optional) undamaged Bracket is used to ensure an integrated, discreet and professional installation.

Each undamaged Bracket is made for your particular vehicle, make and model to ensure a perfect fit. Installs in minutes without any drilling and protect your board surface damage. Detailed instructions are provided with each bracket.

About the Author:

Ben is a successful technical consultant on design of iPod systems and writes regularly for http://ipodcarkitdirect.co.uk

Article Source: ArticlesBase.com – The Ultimate BMW Car Integration Kit for your iPod…