Scanner Case

Typically, a medical device case study is a 500 to 800-word article on how the device improves the diagnosis or treatment of patients. It can also be a success story of how the device increased productivity, revenues, saved money, improved regulatory compliance or reduced downtime. Essentially, a case study is the end user’s testimonial on the benefits of the device.

The structure of a case study for a patient diagnostics, for example, typically includes the following sections:

1. Title

2. Case history

3. Procedure description

4. Discussion

5. Conclusion

The title is the most important part of a case study. It must entice the reader to read further. To do this, it should focus on the benefits of the medical device that are relevant to the target audience. Let’s say the case study is about an advanced, high-resolution, 3D color, cardiac CT (Computed Tomography) scanner used in a specific hospital. Let’s call the scanner Gektar. And let’s say the case study uses a 30-year-old female admitted to the emergency room with severe chest pain. The title could say: “Improved Workflow, Speed and Reliability in Diagnosis of Severe Stenosis with High-Definition GEKTAR CT Scanner.” An effective title requires a good understanding of one’s target audience and what matters most to them.

The case history section describes the patient’s symptoms and diagnostics steps. The female patient in this study was in good condition, but slightly overweight. The physical examination and EKG revealed nothing unusual. Her blood cholesterol was mildly elevated, but she had no history of smoking, drug or alcohol abuse, and was happily married. She had never complained about chest pains before. She was then transferred to the GEKTAR CT scanner to perform non-invasive cardiac CT imaging.

The procedure section describes the procedure performed on the patient and the findings. Let’s say her heart rate was 87 beats per minute. The scan parameters automatically adapted to this heart rate and the scan was successfully completed in ten seconds. The 3D evaluation software produced the high-resolution, 3D, color images – the key proprietary features of the GEKTAR CT scanner. Within minutes, the high-resolution images revealed severe, non-calcified stenosis in a segment of the heart’s blood vessel. The patient was immediately transferred to the cardiac suite for treatment.

The case study includes images of the area affected by stenosis – what the doctors had actually seen on the CT scanner’s monitor. The images would have clear and detailed notes of what they depict.

The discussion section emphasizes the unique benefits of the High Definition GEKTAR CT scanner that allowed the transformation of an uncertain and perhaps initially dubious case into a quick and correct diagnosis with decisive actions that probably saved the woman’s life. Not only did the CT scanner produce high-resolution images within seconds, but it was also connected to the hospital’s information network, where the interventional cardiologists could see and download the 3D color images in seconds, and study the details of the stenosis.

The conclusion section further endorses the CT scanner by stating that the hospital has been using it for over a year on hundreds of patients, and that it has always produced high quality, 3D color images that dramatically improved the reliability of diagnosis, increased productivity, personnel satisfaction and saved lives. Actual quotations and recommendations from doctors could be inserted in this section, stating how incredibly powerful and helpful the GEKTAR CT scanner had been in defining artery diseases, rather than depending on less effective conventional methods.

About the Author:

Alec Alpert is an experienced high-tech copywriter and technical writer. Visit http://www.alecalpert.net to learn how he can help you with marketing collateral and product usage documentation.

Article Source: ArticlesBase.com – Essential Tips on Writing an Effective Case Study for a Medical Device

Realistic Radio Shack Pro 26 Scanner 25-1300MHz (No Gaps) w/leather case $150.00

Scanner Carry Case CC396 $15.05

GRE PSR-800 Portable Digitial Trunking Scanner w/ Carrying Case, AC & DC charger $280.00

Radio Shack Pro-83 Scanner and Case $25.00

UNIDEN BEARCAT BC200XLT SCANNER SCANNING RADIO W/ AC ADAPTER AND CASE $59.99

UNIDEN BEARCAT SCANNER BC 70XLT AS-IS – VINTAGE – RETRO – w/ case $5.00

UNIDEN SCANNER CARRY CASE FOR UBC120 / 220XLT *NEW* $31.58

Vintage Midland High Band VHF Scanning Monitor – Scanner w/ Case & Power Cord $54.95

Uniden BC200XLT Bearcat 200 Channel Handheld Scanner CB Radio W/ Case $79.99

Radio Shack PRO-106 HANDHELD SCANNER CASE #1 ON EBAY $15.99

UNIDEN BEARCAT BCD396XT COMPACT APCO 25 HANDHELD SCANNER CASE #1 ON EBAY $15.99

RACING ELECTRONICS SCANNER CARRY CASE (CT230) $13.56

Uniden FACTORY PROTECTIVE CASE for BC200XLT POLICE SCANNER bc 200 XLT BC 100 $16.99

Uniden BC200 NASCAR POLICE SCANNER upgrade POWER SUPPLY, recharge pack, PRO CASE $69.99

Uniden BC200 NASCAR POLICE SCANNER upgrade kit POWER SUPPLY, AA PACK, PRO CASE $64.99

Uniden BC200XLT POLICE SCANNER bc 200 XLT BC 100 PROFESSIONAL LEATHER CASE NOS $19.99

UNIDEN HOMEPATROL-1 SCANNER CASE #1 ON EBAY $15.99

UNIDEN HOMEPATROL-1 SCANNER CASE #1 ON EBAY $15.99

UNIDEN HOMEPATROL-1 SCANNER CASE #1 ON EBAY $16.99

CARRY CASE FOR ICOM ICR2 ICR5 RADIO SCANNER SCANNERS $10.99

A bar code is compiled to machine-readable information, which is commonly used in the retail merchandise and other tangible products. Codes standard bars have a series of parallel lines printed with numbers situated directly below. Bar codes are read by scanners codes bars, which are also known as bar code readers.

A barcode scanner is a computer device used for reading of printed barcodes. This type of product is commonly found in retail stores. A small handheld unit that reads, translates and provides product information is a type of scanners. When passing through the line of the check, if you notice the spell in search of a label, he or she is likely to find the code bar. Among other things, a barcode scanner can read the item description and price for a single swift stroke.

Similar to a flatbed scanner, barcode scanner consists of a light source, lenses and photography director. These come together to translate optical pulses into electrical impulses. The vast majority of all barcode scanners function decoding circuitry, which analyzes the image of the code date bar.

There are a variety of barcode scanners on the market, including the model of your handheld as mentioned above. Pen scanners are small and they look exactly like a pencil. For their work, it should bring the Council in the barcode and slide it until it throughout the code has been scanned. Fixed scanners are similar to those that are strategically located in retail stores. These are generally issued to customers wishing to know the price of an item without standing in line at the box, which can quickly be achieved through maintaining the barcode under the scanner window and in a few seconds, the name of the product and the price is displayed on a small screen.

Barcode scanners have helped make the world of retail, together with other businesses, work more efficiently and accurately. With computerized data that is stored in a prime location, a barcode is automatically read product data and allows customers to get through the checkout line faster. In addition, bar code scanners are good for help keep track of sales, records and accurate measurements provide an efficient way of reordering a product stores.

Barcode scanners are available at most office supply stores, business centers, specialty and clearance sales business. Prices vary depending on model performance and ensuring that you select. Barcode scanners are a good investment if you need to have an efficient way to distribute, manage or carry records of sales, income and reorders. Before choosing a barcode scanner, be sure to realistically assess their business needs, requirements size with a reasonable budget and guidelines for action. For example, will you be using the scanner in a retail environment? Will it be used by the cashiers, stationed throughout the store or both? As with any business equipment, always select a trusted retailer and ask about product warranties. Keep all warranty information, along with the owner manual, in case of future technical problems. All documentation must be hidden in a safe place that is easily access incase it is needed later.

About the Author:

Peter Bishop

Entrepreneur and
Barcode Scanner
Online-Business owner from Colorado. Visit also his
Fulfillment Service Directory

Article Source: ArticlesBase.com – Selecting The Best Barcode Scanner For Your Business