Original Chimney

Do I need to have my chimney liner cleaned periodically?

I have an oil furnace that vents through the house’s original chimney. (house is 100 years old). Four years ago I had a chimney liner installed and it hasn’t been checked since. Should I have it cleaned, and if so, how often?

Absolutely! It is recommended to have it done yearly if you use the furnace heavily. Otherwise you are asking for disaster.

“Oil soot accumulates on the walls and at the base of the chimney, which should be inspected and cleaned annually by a CSIA certified chimney sweep” (http://www.mastersweep.net/index.php3?gallery=-47-Frequently_Asked_Questions).

GU-84B (gu84,4cx2500a) original CHIMNEY Socket $144.50

GU-84B (gu84,4cx2500a) original CHIMNEY Socket $149.50

Original socket with ceramic chimney for GU-43B tube $59.00

Original socket with ceramic chimney for GU-43B tube $105.00

---

When it comes to smoking chimneys, no two fireplaces that work the same way. There can be many reasons why your chimney is not working properly and smoke is getting into your home.

The height of the chimney

There is a rule of measurement need to be followed for each stack. If the measure it follows that there should have no problem with your fireplace, however, there can be exceptions. To determine whether the rule has been followed you should measure ten feet from the chimney to the closest object. This object can be the roof line, which starts an addition, or beak. Once you find the ten foot mark measure up to two feet and that is the height of the chimney should be.

The chimney should be at the right height to catch the wind. There is no need for the fire to be higher than the peak of your roof. If the peak is in the ten foot area of settlement is due. This is because the wind will blow through the ceiling and must make an updraft and pull the smoke with him.

Sometimes it is necessary to raise the height of the chimney, whether a pressure situation occurs. There have been some products introduced into the market that can help raise the price of your chimney.

You can use an extender to increase its combustion stack up to three feet. They are usually made of copper or stainless steel and have been tested to eliminate the problem of project. It is much less expensive to use one of these than it is to have your chimney raised.

Fireplaces are another method to eliminate problems in your fireplace project. They have been around for centuries and were originally made of clay.

The new chimney pots are made of copper. They are more expensive than the variety of clay pot, but they are very beautiful and can add to the look of your home. When the age of the copper to turn green color is beautiful.

For those homes that are metal zero tolerance will be necessary for you to get the model number of the manufacturer and the manufacturer's name so you can get the size of the pipe will have to raise your fireplace. There may be a regulation in this city that calls to include the pipe in a chase. This could do you have to build the persecution of the new height.

This may solve some problems with smoke in your home, but if you can not have more problems with your fireplace.

Chimney caps, like the Vacu-Stack or Windbeater are another solution to their design problems. They are made specifically to create a current upward when the wind blows across your roof and chimney. The cap will stay put and wind around the top circle and make an updraft. This works quite well with masonry chimneys, solid pack chimney pipe and metal chimneys. You can find a variety of sizes and adapters that work in most masonry fireplaces.

If you have a metal chimney that does not need an adapter. You can measure the inner tube if you have a tube of air-cooled chimney with two or three tubes inside. An external pipe collar comes with the Vacu-Stack for these types of fireplaces. If you have a problem with the wording with your furnace or water heater can usually find smaller sizes to fit these. About the Author:

Jim Warren helps people select the perfect chimney liner online. His web site shows you everything you need to know before it’s too late. Visit http://www.chimneylinerguide.com for more information.

Article Source: ArticlesBase.com – Solutions to Common Chimney Liner Problems