Nickel Metal

What can I put on my belt buckles and buttons because of a nickel metal allergy?

I have a nickel metal allergy. Most of my belt buckles and jean buttons seem to be some sort of metal irritant. I may also be allergic to other types of metal. Gold, steel, silver and titanium are fine, but I know Nickel is not my friend. Is there anything I can put on the metal so that it can touch my skin without causing irritation?

The only solution that is cheap is clear nail polish.
Do it one layer at a time-let it dry completely, then another layer-and build it up. Most likely every time you wash the clothes it may start to come off but that’s about all you can do. On your jeans, and shirts-you can cut small circles of cloth and sew them to cover the ‘back’ of the button where it would be touching you. This won’t show at all when you are wearing the clothes, and would be permanent.
In a hurry-get some cloth adhesive ’surgical tape’-it’s made for holding quaze, pads, etc. for days and the GOOD brands will stick to cloth-so you could use small pieces to cover the button backs for a day while you wear them-until you have a chance to sew on permanent covers.

Fedco ENERGY+ Barcode reader battery – Nickel metal hydride 2700 mAh $29.00

Lot of 5 Motorola 6500 mAH 4.8V Nickel Metal Hydride Battery NTN8970A $59.99

Kenwood / TH-K4AT 1100MAH PB-43N battery nickel-metal hydride battery $18.00

Liberty Nickel, commonly known as the "nickel V" for the Roman numeral "V" on the reverse was officially produced from 1883 to 1912. We use the word officially because one of the most famous coins of all is the 1913 Liberty nickel, which occurred in suspicious circumstances. For more information on the famous 1913 Liberty Nickel in the article entitled "History of the Famous 1913 Liberty Nickel.

In 1881, A. Loudon Snowden, Superintendent of the Mint in Philadelphia addressed head recorded at the time, Charles Barber, to create designs for the cent, three cents and nickel. Snowden believes that all three coins should be similar in design and metal composition. The designs created by Barber were simple in appearance with Lady Liberty on the obverse and a number Roman I, III and V in the back to represent the denomination. Barber made the request at the end of that year with the three coins copper-nickel stuck to the same Shield nickel that currently outstanding. The Shield nickel was introduced in 1866, was the first "nickel" size of the coin. Mean dime, silver, and had filled the need for this designation. The Shield nickel was well received despite the fact that during this time period, consumers liked their coinage of silver or gold. And while nickel was relatively new, its design was soft ripe for a new design. Also during this time, there was still no federal law that establishes minimum life expectancy for U.S. coin designs.

Change the cent, three cents and nickel could not be. The Congress opposed a change in the composition of the cent and the Treasury would not approve a redesign of the three cents. The three-percent silver piece has been discontinued for several years before and three percent nickel, with the exception of 1881 had been a decrease in number of issue. With the nickel appeared to be the only viable option for change, Snowden Barber and concentrated on making the change of the nickel into a reality. Moreover a design / change the appearance, Snowden also changed the size from 20.5 mm to 21.2 mm diameter. Snowden believes that increasing the diameter and the reduction thickness (weight remained unchanged), dies life would be extended.

After all the finishing touches were complete, there was a special ceremony on January 30 1883 to present the new nickel. Those who attended, and is considered important, given first strike coins. A few days later, regular production began. The new nickels had been distributed just a big problem to light. The coin contains the word "cents" and with artists of the time were nickel coating with gold and pass them off as $ 5.00 gold pieces. Because the nickel was still new, the general public was unaware of new nickel and from the "V" was the only symbol of value, which could mean 5 cents or 5 dollars. Unfortunately for the Mint, about 5 million ½ nickels had been produced and released. Barber quickly creates a new design, this one with the word cents a prominent on the back. The first nickels soon became known as the "no cents" nickels. The coins that were bathed in gold is known as "nickels mafia" and can still be found in ancient treasures and collections.

In the end, some 16 million nickels are produced in 1883. Although more 1883 nickels with the word "cents" were produced, they are harder to get in good grades. The "no cents" variety was saved by people who think they are recalled / replaced.

After this initial controversy, freedom Nickel was devoted to a quiet life. There were no significant changes during the lifetime of the nickel, and for all but the last year, all coins were made in Philadelphia. In the last year of official production in 1912, nickels also were made in Denver and San Francisco. 1913 gave way to the Buffalo nickel followed changed in the dime, quarter and half dollar.

About the Author:

Keith Scott has been a collector for over 30 years. His website has
US coins for sale.
He also writes
Coin Collecting Articles
for fun. Visit his websites for a history of US coins, metal market updates and news about your favorite coins.

Article Source: ArticlesBase.com – History of the Liberty ‘V’ Nickel