Mount Wire

Where’s the best location on a 2000 s10 to mount the ground wire for an amplifier?

I’ve kept putting in and taking out my subs and amp from my truck. The last time I put it back in a had no sound from my sub. I currently have the ground wire hooked behind the jump seat of the extended cab. I touched the ground to the power cable and no spark! Anyone have a better spot for me to mount my ground wire?

well first you probably already blew the fuse under the hood. and a proper ground should be on the chassis of the car(unpainted- scratch off paint) not on a seat bolt or any other bolt.

SCANNER Suction Cup Window Mount Wire ANTENNA – New $3.94

Suction Cup Wire Window Mount ANTENNA for SCANNERS – Workman SC1 $3.95

Motorola Maratrac 100 watt VHF Radio RemoteHead/mic/speaker/mount/wiring $75.00

20 PCS BATTERY CLIP AA NEW OLD STOCK AA PCB MOUNTS OR SOLDER TAB FOR WIRE $5.00

BNC SCANNER GLASS MOUNT WIRE ANTENNA WITH SUCTION CUPS $12.99

With a budding artist at home, you want to mount their paintings on the walls and draw attention to them. What better way to use track lighting? Lighting Today the track is as pretty as it is practical and has a wide range of styles to choose from.

Even for non-practice among us, lighting the track can be easily installed, as there is now track lighting kits that can only connect in are easy to install, but if you want the professional look lighting of the real track, you have to do any installation. It's not as difficult as you may think that if you follow these instructions.

First Instead, you have to collect all your materials and tools. You will need a helper, a ladder or step stool, light from the full kit, tape measure, drill, a screwdriver, electric wire and tape, long nose pliers, a circuit tester, a voltage meter,
toggle bolts, and wire nuts. Have all what so you do not have to stop and start again on the project, and then take step by step.

One step. Turn off power at the breaker box or service panel. Check with the circuit tester to make sure there is no power on the line. Remove the existing apparatus and disconnecting the cables, keeping the ends live apart each other.

Step two. Connect the whip on the track and secure by tightening the screw, then attach the mounting brackets. Connect the cable flexible leads (short wires connected to the terminal) to the house wiring and secure with wire nuts. The collection of black to brass and wirer white pigtail to the silver thread and green wire spiral green.

Step three. Spread the location of the track, on the basis of where you want to hang the pictures and its junction box is. You can use Ts or angles to the lines closer, but be sure to use the same brand as your system. Mark the mounting holes and make ensure that the track will be uniformly parallel to the wall. Screw holes alternating.

Step Four. Mount the track, placing the circuit and the fixing cables in the junction box and install the mounting plate in the box. Adjust the track at the junction box following instructions. Put the bolt through and carry the subject to the ceiling. (You need help at this point.) Insert the screws into drilled holes and attach all the accessories and parts end up at the ends of the track. Connect the power adapter to the track and install the cover over the assembly. Install screw accessories and bulbs.

Step Five. Turn the power on and test again lights. If that fails, check the current with the tester and check for any missed connections.

Now all you need to do is to hang the pictures and adjust lights to show off. Adding dimmer switches add atmosphere to this beautiful art display.

About the Author:

Focusing on informating about drill tools, Leroy Calstard writes mainly for
http://www.insidewoodworking.com
. His abstracts on makita power tools are published on

http://www.insidewoodworking.com/makita/makita-power-tools.htm

Article Source: ArticlesBase.com – Mounting Lights For The Best Effect